How to descale your De’Longhi ESAM 04.110.S or ESAM 04.110.B

How to descale your De’Longhi ESAM 04.110.S or ESAM 04.110.B


[Music] descaling descale the appliance when the light on the panel flashes you should use DeLonghi descaler only using unsuitable descaler and or performing descaling incorrectly may result in faults not covered by the manufacturer’s guarantee turn the machine on empty the water tank [Music] pour the descaler diluted with water respecting the proportions indicated on the descaler Pat into the water tank [Music] place an empty container with a minimum capacity of 1.5 liters under the hot water spout wait for the one cup and 2 cups likes to come on steadily press the rinsing descaling button and hold it down for at least 5 seconds to confirm that you have added the solution and begin the descaling procedure the light in the button remains on steadily to indicate that the descaling program has begun the 1 cup 2 cups and steam lights flash simultaneously telling you to turn the steam knob to the eye position coffee cannot be made turn the steam hot-water knob anti-clockwise to the I position the descaler solution flows out of the cappuccino maker into the underlying container avoid contact with splashes of water the descale program automatically performs a series of rinses and pauses to remove limescale deposits from inside the machine after about 30 minutes the water tank is empty the water tank light comes on and the one cup two cups and steam lights alternate turn the steam hot-water knob clockwise as far as it will go to the zero position the appliance is now ready for rinsing through with clean water empty the container used to collect the descaler solution remove the water tank empty rinse under running water fill with clean water and replace [Music] the one cup two cups and steam lights flash simultaneously turn the steam hot-water knob a half turn anti-clockwise to the eye position hot water comes out of the spout when the water tank is completely empty the rinsing descaling light goes out and the water tank and one cup two cups and steam lights flash turn the knob to the zero position fill the water tank again the appliance goes off automatically to use the appliance turn it on by pressing the on standby button please note if the descaling cycle is not completed correctly for example lack of electricity we recommend repeating the cycle important a descaler contains acids which may irritate the skin and eyes it is vital to respect the manufacturer’s safety warnings given on the descaler pack and the warnings relating to the procedure to follow in the event of contact with the skin and eyes you

Leave a Reply

Your email address will not be published. Required fields are marked *