How to use your De’Longhi ESAM 04.110.S or ESAM 04.110.B for the first time

How to use your De’Longhi ESAM 04.110.S or ESAM 04.110.B for the first time


[Music] using the appliance for the first time [Music] remove the water tank fill to the max line with fresh water then replace in the appliance you should customize water hardness as soon as possible following the instructions in the section setting water hardness turn the cappuccino maker outwards and place a container with a minimum capacity of 100 milliliters underneath plug the appliance into the main socket and place the main switch on the back of the appliance in the eye position the one cup and coffee temperature okay light the two cups of coffee temperature okay light and the steam and steam temperature okay light flash simultaneously turn the steam hot water knob a half turn anti-clockwise as far as it will go to position I water is delivered from the cappuccino maker it is normal for the appliance to make some noise wait for delivery of hot water to stop automatically the one cup two cups and steam lights flash to indicate that you must close the steam tap by turning the steam hot-water knob to the zero position turn the steam hot-water knob to the zero position the appliance goes off automatically to use the appliance turn it on important when using the appliance for the first time you need to make four to five cups of coffee or four to five cappuccinos before the appliance starts to give satisfactory results please note coffee has been used to factory test the appliance and is therefore completely normal for there to be traces of coffee in the mill the machine is however guaranteed to be new [Music]

Leave a Reply

Your email address will not be published. Required fields are marked *